3D printing materials

Full-color 3D Printing Service

Here at JawsTec, we offer 3D printing in full color. Read more about it below.

Full-Color 3D Printing

You can order your MJF parts printed in full-color, rather than dyed in post production. This helps ensure the accuracy of the coloring and functionality of the part. It also guarantees a repeatable and highly-detailed piece.   


General Information Full-color prints require a .3MF file when uploading to our quote page. Color prints are only available in MJF material and are generally more expensive than dyed parts.
  • Easier to design than traditionally manufactured parts
  • Complex geometries
  • High precision
  • Reusable materials
  • Eco-friendly
  • Consistent performance
  • Higher cost than regular MJF parts
  • Only available for MJF material



Price $ $ $ $ $
Lead Time  +/- 6 business days
Wall Thickness 1 mm
Tolerance (X,Y): +\\\\- 0.300mm or 100mm +\\\\- 0.3%

(Z): +\\\\- 0.400mm or > 100mm +\\\\- 0.4%

Max part size (HP MJF 4210 and 5210): 380mm x 280mm x 380mm
Layer height 80 μm


Available materials

MJF Nylon Full Color PA 12

We offer full color printing with our PA 12 material. You can select this option uploading your .3MF files to our instant quote page. With essentially the same properties as the regular PA 12 material, full color parts give you more accurate, precise, and detailed coloring than post-processing dyeing. We suggest full-color nylon PA12 if your parts require a cleaner coloring job than dyeing can provide.


  • FAQ 1: What resolution are your prints?

    Our prints have a layer thickness of 80 microns in MJF and 120 microns in SLS.

  • FAQ 2: What types of printers do you use?

    We print with HP MJF 4200 and 5210 machines, as well as EOS P396, P770, and XYZ 230 machines.

  • FAQ 3: What types of finishes do you offer?

    We offer raw, tumbled, polished, and vapor polished finishes on our parts.

  • FAQ 4: What resolution are your prints?

    Our layer thickness is 80 microns in MJF and 120 microns in SLS.

  • FAQ 5: Do you offer rush production?

    Rush production is available for MJF PA12, SLS PA12, and SLS PA2200. However, you must have your orders in by 2:00 MST in order to start printing the same day. If you order comes in after 2:00 MST, your rush production order will be delayed by one business day. You can select rush production on our quote page.

  • FAQ 6: Do you offer CAD design work?

    We offer in house CAD design work starting at $50/hour. Email [email protected] for more information.

  • FAQ 7: What type of files can you print off of?

    We can print off almost any CAD file type. We prefer .STL files. We can only print in color off .3MF files.

Put your custom parts into production today.