by Ella | Aug 16, 2022 | 3D printing, 3D Printing Materials
FAQ #20 FAQ Manufacturing (jawstec.com) We now offer a section on our quote page for requesting a specific orientation. After uploading your CAD file to the quote engine, simply select the box for specific orientation and then upload a PDF or image that shows your...
by Ella | Aug 16, 2022 | 3D printing, 3D Printing Materials
FAQ #19 FAQ Manufacturing (jawstec.com) The best material for a product that must not warp in the sun is SLS Nylon with a raw finish and no dyed coloring in post production. If you do need color on your part, we suggest painting it yourself or having it vapor polished...
by Ella | Aug 16, 2022 | 3D printing, Additive Manufacturing
FAQ #18 FAQ Manufacturing (jawstec.com) Currently we offer 4 finishes on our products: tumbling, polished, vapor polished, and raw. These finishes each have a different degree of smoothness, with vapor polishing being the most smooth and raw being the roughest. It...
by Ella | Aug 16, 2022 | 3D printing, 3D Printing Materials, Additive Manufacturing
FAQ #17 FAQ Manufacturing (jawstec.com) Our prints have a layer thickness of 80 microns in MJF and 120/80 microns in SLS. This means that SLS has a slightly higher resolution than MJF. The reason for this difference is that the SLS laser is able to be more detailed...
by Ella | Aug 16, 2022 | 3D printing, Additive Manufacturing
FAQ #16 FAQ Manufacturing (jawstec.com) We are able to use almost any type of 3D CAD file, but STLs are our preferred method. We can also use 3mf, STP, STEP, and OBJ. However, we are unable to quote off PDFs or scanned drawings since they are not considered 3D CAD...
